Greetings,
Attached and listed below are photo's and description of a Karl Suss
model MA150 mask aligner we have for sale, trade or combination of both.
The aligner is currently installed in our lab and operational, can demo.
Other tools we have available are as follows:
1. MRC 902 sputter
2. MRL 4 Stack LPCVD (new) (2)
3. K&S 6496 Die bonder
4. K&S 1471 wire bonder (2)
5. Plasmatherm model 7000 cluster 3 chamber RIE (large panel)
Regards,
Karl Suss MA150
Serial no. 153
350W CIC-500 controller - Refurbished,
Cassette-to-cassette with prealigner configured for 125mm wafers
Exposure tower capable of handling 1000W High Pressure Mercury bulb.
Maintenance, User and CIC controller manuals are still available.
Accessory box available containing:
- Mask holder for 125mm square wafers
- Square chuck for 125mm square wafers
- Spare objectives
- Spare transfer arms
- Metric allen wrenches
Exposures Modes
Proximity Yes
Soft Contact Yes
Hard Contact No
Vacuum No
Software:
Original software for installation on any 386 or 486 PC available on either
5-1/4" or 3-1/2"
Installation is almost automatic with this software.
Driver Boards:
Spare driver board available
Steve Scoggin
Master Scientific Research Technologist
University of Arkansas
Department of Electrical Engineering
3217 Bell Engineering Center
Fayetteville, Ar 72701
Office 479-575-6049
cell 479-236-6049
Fax 479-236-6049
-
You are subscribed to labnetwork@mtl.mit.edu
To unsubscribe from this list, send a message with the message body
"unsubscribe labnetwork" to majordomo@mtl.mit.edu
This archive was generated by hypermail 2b29 : Tue Mar 09 2004 - 07:49:07 EST