From m.portillo at hbtusainc.com Thu Nov 1 17:01:40 2007 From: m.portillo at hbtusainc.com (Mario Portillo) Date: Thu, 1 Nov 2007 14:01:40 -0700 (PDT) Subject: [labnetwork] GCA 3600 Schematics Message-ID: <375833.46210.qm@web1008.biz.mail.sp1.yahoo.com> Labnetwork community........Fareed Dawan From LSU is in badly need of the schematics for the above mentioned system. They have been down for three months now... Would one of you with a similar system be kind enough to help....they will pay for the round trip of the schematics to be copied. Please contact Fareed directly or Dr. Jost Goettert. I hope they get the much needed help. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: From ddgoo1 at gmail.com Tue Nov 6 17:41:28 2007 From: ddgoo1 at gmail.com (Dennis Goodline) Date: Tue, 6 Nov 2007 14:41:28 -0800 Subject: [labnetwork] Hitachi M308 metal etch help needed In-Reply-To: <10bfb67b0711061431k18eb99d6ve7823e5546b0ef11@mail.gmail.com> References: <10bfb67b0711061431k18eb99d6ve7823e5546b0ef11@mail.gmail.com> Message-ID: <10bfb67b0711061441n5d7ea995hfb108849a31308db@mail.gmail.com> To Labnetwork My group needs hardware and process engineering help to support up to qty 13, HITACHI HI TECH 308 METAL ETCHER tools, wafer Size: 200mm. The tools will be deinstalled, packed and crated in the US and then shipped to a new wafer fab near Shanghai in Q1 or Q2, 2008. We are looking for engineer(s) who can do the reinstallation, hardware startup and process development on these tools in China. Please contact me by email with your capabilities and availability. Thank you. Dennis Goodline TIP ELECTRONICS ddgoo at yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From voros at eecs.berkeley.edu Tue Nov 6 17:53:19 2007 From: voros at eecs.berkeley.edu (Katalin Voros) Date: Tue, 06 Nov 2007 14:53:19 -0800 Subject: [labnetwork] JEOL107 SEM and writer for sale Message-ID: <4730F05F.3070305@eecs.berkeley.edu> For sale: Jeol 6400 SEM with NPGS pattern generation system. The University of California at Berkeley Microfabrication Laboratory has purchased a new e-beam lithography tool. We are offering our current system, a functioning JEOL 6400 SEM with NPGS pattern generation system, circa 1997 to universities or research groups who wish to add e-beam pattern generation to their capabilities. The tool is currently in daily use. Specifications for this system are available at the following URL's: http://microlab.berkeley.edu/labmanual/chap4/4.16.html http://www.jcnabity.com/ Price for this system is negotiable. Interested parties may test this system to assure it meets their needs. Crating and shipping are the responsibility of the purchaser. Experienced Microlab equipment staff is available to assist with disassembly. If you are interested contact, Katalin Voros, voros at eecs.berkeley.edu by e-mail for further information or with offers. Thank you. Sincerely Katalin -------------------------------------------- KATALIN VOROS Principal Development Engineer Microlab Operations Manager Electrical Engineering and Computer Sciences University of California at Berkeley 406 Cory Hall #1770 Berkeley, CA 94720-1770 phone: (510) 642-2716 fax: (510) 642-2916 voros at eecs.berkeley.edu http://microlab.berkeley.edu -------------------------------------------- -------------- next part -------------- An HTML attachment was scrubbed... URL: From yi_xu at sfu.ca Wed Nov 7 12:59:57 2007 From: yi_xu at sfu.ca (Yi Xu) Date: Wed, 07 Nov 2007 09:59:57 -0800 Subject: [labnetwork] A job posting Message-ID: <200711071800.lA7I06dL018781@rm-rstar.sfu.ca> Dear Sir: If you don't mind, would you help me to post a job announcement through your network? Regards Yi Xu 4D LABS, Chemistry, SFU 778.782.8084 -------------- next part -------------- A non-text attachment was scrubbed... Name: 4D_LABS-CleanRoomTechs-10_20072.pdf Type: application/octet-stream Size: 175342 bytes Desc: not available URL: From npeters at email.sjsu.edu Thu Nov 15 17:22:08 2007 From: npeters at email.sjsu.edu (Neil Peters) Date: Thu, 15 Nov 2007 14:22:08 -0800 Subject: [labnetwork] Vacuum General 80-55 mfc pinout needed Message-ID: <002301c827d5$f66153b0$50984182@ZAD> WE are trying to hook-up a vacuum general model 80-55 mass flow controller power supply control unit to an AERA FC-7700 mass flow controller. Does anyone have the pin-out or manual for this unit? It has a 9-pin d sub connector. Thanks for your help Neil Peters Process Lab Engineer Department of Chemical and Materials Engineering http://www.engr.sjsu.edu/cme San Jose State University voice: (408) 924-3967 One Washington Square fax: (408) 924-4057 San Jose, CA 95192-0082 E-mail: npeters at email.sjsu.edu -------------- next part -------------- An HTML attachment was scrubbed... URL: