From mark.crain at louisville.edu Tue Apr 6 16:50:13 2010 From: mark.crain at louisville.edu (Mark M Crain) Date: Tue, 6 Apr 2010 16:50:13 -0400 Subject: [labnetwork] Suss Aligner MABA6 WEC Message-ID: <4BBB6648.716B.0008.0@gwise.louisville.edu> Hi Everyone, I am interested in speaking with someone familiar with the Wedge Error Compensation system in a SUSS MABA6. It is a great system and has served us well for many years but I must be honest in saying that I have had no need to do any maintenance on the WEC. I have no information regarding PM of the WEC in my Suss manual; I believe a couple hints and I can be on my way. Best Regards, Mark Mark Crain Cleanroom Manager University of Louisville SRB room 233 2210 South Brook Street Louisville KY 40208 Phone 502/852-1572 Fax 502/852-8128 From philippe.fluckiger at epfl.ch Tue Apr 13 04:15:59 2010 From: philippe.fluckiger at epfl.ch (Philippe Fluckiger) Date: Tue, 13 Apr 2010 10:15:59 +0200 Subject: [labnetwork] Supplier for Thin SOI Wafers in 100mm diameter ? Message-ID: <7.0.1.0.2.20100413100852.0ccf4060@epfl.ch > Dear all, Does anyone know a good supplier for thin SOI wafers in 100mm format. Typically I'm looking for 340nm SOI in 100mm format. SOITEC is not offering this kind of product. I'm not satisfied with the quality from SIMGUI. Any help would be appreciated. With my very best regards, Philippe Dr Philippe Fl?ckiger Director of Operations http://cmi.epfl.ch/ Phone +41 21 693 6695 -------------- next part -------------- An HTML attachment was scrubbed... URL: