[labnetwork] 3rd party repair/calibration of legacy metrology

[Kuhn, Jeffrey G]

Gregg,

If repair is not possible, I found a link to one that is for sale in China. Looks like the CRT and flow meter are included:

http://www.netchina.net/finddate_e/ptshow.php?number=40085

I had two HSLIS M50's when I was in the private sector, but they were sent to a sister location when my plant closed back in '05. Even back then, PMS no longer supported that model.

Good luck!

Jeff Kuhn
Facility Engineer
Birck Nanotechnology Center
Purdue University
1205 W. State St.
West Lafayette, IN 47907
Ph:  (765) 496-8329
Fax: (765) 496-2018




From: labnetwork-bounces at mtl.mit.edu [mailto:labnetwork-bounces at mtl.mit.edu] On Behalf Of Gregg Cure
Sent: Thursday, December 16, 2010 5:44 PM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] 3rd party repair/calibration of legacy metrology

We have an older (about 1992 or so) Particle Measuring Systems model HSLIS-M50 liquid in-situ monitor and particle counter. It has stopped working.
A conversation with PMS yielded no joy (they no longer support legacy metrology of this vintage).

Does anyone know of a 3rd party company who repairs and calibrates older laboratory metrology?

Thanks in advance,
Regards,

--
Gregg D. Cure`
The University of Arizona
Arizona Research Laboratories
Nano Fabrication and Processing Center
1230 E. Speedway Blvd.
P.O. Box 210104
Tucson, AZ 85721-0104
Office: 520.626.1987
Cell: 520.307.2760
Fax: 520.626.7877
Website: http://mfc.engr.arizona.edu
Website: http://www.arl.arizona.edu/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20101217/aceb9f81/attachment.html>