[labnetwork] Branson Asher

[Stephen CS Howe]

Dear Richard,

If you can't fix it let me know.
We can probably supply a replacement robot and/or  controller and cable
if needed.
Branson was taken over by Gasonics and then by Novellus. You could
possibly ask Novellus for support but they did discontinue that product.

Yours sincerely,

Stephen Howe 
Company Owner
SDI Fabsurplus Group

 +1 830 388 1071 (USA Mobile)
+39 335 710 7756 (Italy Mobile)
Skype: Stephencshowe
e-mail:showe at fabsurplus.com
WWW.FABSURPLUS.COM

On Wed, 2011-03-09 at 10:24 -0500, Richard Battaglia wrote:
> Lab Network community,
> 
>  
> 
> We have in the SMFL, here at RIT,  a Branson Asher IPC3200/6.  At this
> time we are having issues with the ADE 350 ARM not responding to the
> machine.  Is there anyone out there with any knowledge on this tool or
> the robot?  I have tried to talk to the robot controller with Hyper
> Terminal but have had no success.  I am not sure if we are having
> robot issues or if the computer hard drive in the Branson is the
> problem.  Any help is greatly appreciated.  
> 
>  
> 
> Thank You
> 
>  
> 
> Richard Battaglia
> 
>  
> 
> Richard L Battaglia
> 
> RIT/SMFL
> 
> BLDG 17 ROOM 2627
> 
> 82 Lomb Memorial Drive
> 
> Rochester NY 14623
> 
> 585-478-3834 - phone
> 
> 585-475-5041 - fax
> 
>  
> 
> 
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://www-mtl.mit.edu/mailman/listinfo.cgi/labnetwork