[labnetwork] CMP pads storage
Christophe Clément
christophe.clement at polymtl.ca
Mon Feb 18 17:00:44 EST 2013
Hi everyone,
We, at polytechnic School of Montreal, are going to buy a refurbished CMP
tools for our microfabrication lab: Strasbaugh 6EC.
That will be our first experience with CMP. Weve been told that we have
to keep our different pads, as soon as they are utilized, under wet
condition in a special cabinet.
Some of you have maybe experience with such cabinet, if you can advice us
regarding the design, size, water flow rate, how the pad are oriented
(standing up or in a drawer...), that will be really appreciated!
Also, if some of you has this tools, could you please describe utilities
that need the tools? Such as DI water system, Slurrys canister,
recirculation pump...
Thank you for your help!
Christophe Clément
Technicien laboratoire
Laboratoire de microfabrication (LMF)
Groupe des Couches Minces (GCM) www.gcmlab.ca
Ecole Polytechnique de Montréal <http://www.polymtl.ca/> www.polymtl.ca
Département de génie physique
* 2900 Boulevard Edouard Monpetit
Pavillon JAB
Campus de l'Université de Montréal
Montréal (Québec) H3T 1J4
8 <mailto:christophe.clement at polymtl.ca> christophe.clement at polymtl.ca
( 514 340 4711 # 2417
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20130218/021b3c5b/attachment.html>
More information about the labnetwork
mailing list