[labnetwork] question about resizing 200mm wafers down to 100mm
Benes Zdenek
zdenek.benes at epfl.ch
Tue Mar 12 09:50:10 EDT 2013
Hi,
terribly sorry for this unsolicited email, but would any of you know a good reference for a company, that does wafer resizing from 200mm to 100mm wafers? ideally 2 small wafers from one large one, they would also apply protective resist coating on both sides, and round the edges afterwards?
preferably, on the Swiss side of the Atlantic ocean :-)
thanks a lot for the tips
sincerely
zdenek
--------------------------------------------
Zdenek Benes, PhD
Ebeam, SEM, FIB engineer
Center of MicroNanoTechnology, EPFL
BM 1.127 (BM Building)
Station 17
CH-1015 Lausanne
Switzerland
Phone: +41 21 693 7751
Fax: +41 21 693 5770
Email: zdenek.benes at epfl.ch
CMI : http://cmi.epfl.ch/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20130312/e5580aea/attachment.html>
More information about the labnetwork
mailing list