[labnetwork] RTA's

[Paolini, Steven]

Tom,
   I have owned a few in the past and currently have one in my clean room. The unit is well made and not very troublesome. Parts availability, (always a concern) is sketchy and slow since the machine is made in France and represented by a third party (Semco Engineering) In Texas. I share your concern about the operating system but have received good service with software issues in the past. The software itself is quite intuitive and easy to train people on. The graphical "real time" feature is a big plus for troubleshooting.
You are welcome to come here as my guest and look it over.
Best of luck,
   Steve Paolini
   Equipment Dood
   Harvard University Center for Nanoscale systems.

From: labnetwork-bounces at mtl.mit.edu [mailto:labnetwork-bounces at mtl.mit.edu] On Behalf Of Ferraguto, Thomas
Sent: Monday, March 17, 2014 8:39 AM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] RTA's

Colleagues

We're looking for a table top RTA. We found Jipelec Jetfirst 200 circa 2008 on the used market.

We're a little concerned about an aging operating system (it's probably has Windows 95 or 98)

If you have any opinions on the Jipelec unit or any other table top you may have an opinion on your input would be welcome.

Best Regards

P.S> Don't forget to Sign up for UGIM

http://www.cns.fas.harvard.edu/UGIM2014/

Thomas S. Ferraguto
ETIC Nanofabrication Laboratory Director
University of Massachusetts Lowell
1 University Avenue
Lowell MA 01854-5120
978-934-1809 land
617-755-0910 mobile
978-934-1014 fax
[cid:image001.png at 01CF41D6.A4411850]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20140317/94f5806c/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 57996 bytes
Desc: image001.png
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20140317/94f5806c/attachment.png>