[labnetwork] help on MVD100
John Shott
shott at stanford.edu
Thu Jun 18 00:08:54 EDT 2015
Xiaojin:
Let me start by saying that I know nothing about the MVD100 from Applied
microstructure. However, for what you are asking, that may not matter ...
This appears to be a system that is mounted on a top and bottom DIN rail
... although it it hard to tell for certain from the picture. I think
that you are asking how to remove the AC/DC converter from the row of
devices on the lower DIN rail and then later replace it. Do I have that
right?
If so, I think that I can help ... but, I should ask you to confirm that
before either wasting your time or that of the other members of this
community.
Are you asking how to remove components from DIN rail (also known as top
hat rail)?
Thanks,
John
On 6/17/2015 2:05 PM, xiaojin.wang at louisville.edu wrote:
>
> Dear colleagues:
>
> We have a MVD100 system from Applied microstructure. The system cannot
> be powered on lately and the issue has been identified as a bad AC/DC
> converter. We need to replace that part. Does anyone know how to take
> it out properly? Thank you.
>
> Best wishes
>
> Xiaojin Wang
>
> Senior process engineer
>
> Micro/nano technology center
>
> University of Louisville
>
>
>
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://www-mtl.mit.edu/mailman/listinfo.cgi/labnetwork
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20150617/608ebdac/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 247819 bytes
Desc: not available
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20150617/608ebdac/attachment.png>
More information about the labnetwork
mailing list