[labnetwork] Ebeam & Sputtering of unknown material
Christophe Clément
christophe.clement at polymtl.ca
Wed Dec 14 09:20:47 EST 2016
Good morning all
Ive been ask to deposit on optical fiber tips material that we do not
have any experience with.
These materials are: MgF2, BaF2, KBr and CaF2. The two first are listed
fair by Ebeam evaporation on KJL tables, the two other with thermal or
sputtering.
Does anyone have use these kind of material before? If yes, is there any
advice regarding manipulation, chamber contamination/cleaning that we need
to know before accepting this project?
Thank you all for your help, always appreciated!
Best
Christophe
Christophe Clément
Technicien laboratoire
Laboratoire de microfabrication (LMF)
Groupe des Couches Minces (GCM) <http://www.gcmlab.ca> www.gcmlab.ca
Ecole Polytechnique de Montréal <http://www.polymtl.ca/> www.polymtl.ca
Département de génie physique
* 2900 Boulevard Edouard Monpetit
Pavillon JAB
Campus de l'Université de Montréal
Montréal (Québec) H3T 1J4
* <mailto:christophe.clement at polymtl.ca> christophe.clement at polymtl.ca
* 514 340 4711
Fax : 514 340 4711 # 2417
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20161214/51dd8a12/attachment.html>
More information about the labnetwork
mailing list