[labnetwork] After Hours Policies - Wet Processing
Mark Hofheins
mhofheins at unm.edu
Fri Sep 30 08:04:04 EDT 2016
We require a buddy any time Corrosives and acid are in use. All personal with access to the Fab have to go through chemical and other safety training.
They are given a power point presentation and a questionnaire. Any questions that are scored wrong are reviewed with the individual.
We have a card reader access which is monitored. We have a camera system and recording system.
After hours work not available. We will on occasion work with someone if they need to stay a little late.
Mark Hofheins
mhofheins at unm.edu<mailto:mhofheins at unm.edu>
505-710-3527
Micro Electronics Technician
Manufacturing Engineering
University of New Mexico MTTC
800 Bradbury S.E. Suit 235
Albuquerque, New Mexico
87106-4346
________________________________
From: labnetwork-bounces at mtl.mit.edu <labnetwork-bounces at mtl.mit.edu> on behalf of Michael Hume <michael.hume at ualberta.ca>
Sent: Thursday, September 29, 2016 1:30 PM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] After Hours Policies - Wet Processing
Dear Colleagues,
We are in the process of re-evaluating our after-hours policies, specifically in regards to wet chemical processing (eg. HF/BOE/KOH/TMAH/Piranha cleaning). Historically, we have not allowed these processes after hours, primarily due to safety concerns. That said, as demand within our facility grows, and the competence of our user base increases, the question has been raised as to why these processes can't be performed within a framework of proper procedures to ensure user safety (eg. buddy system, etc..)
I am interested in the general approach of other facilities. Does anyone allow these processes? Does anyone forbid them? In either case what is the general reasoning for your decision? If you do allow them, what sort of protocols or policies do you have in place to provide a safe working environment?
Any feedback you may have is much appreciated!
Regards,
--
Michael Hume
Operations Manager
University of Alberta - nanoFAB
W1-060 ECERF Building
9107 - 116 Street
Edmonton, Alberta
Canada T6G 2V4
www.nanofab.ualberta.ca<http://www.nanofab.ualberta.ca/> Ph: 587-879-1519
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20160930/a8e6e6a9/attachment.html>
More information about the labnetwork
mailing list