[labnetwork] Oxford PC2000 software for ICP100

[Kevin Owen]

Kevin,

Do you know what part of the computer "died"? If the hard drive is still
functional (or if you have a backup image of it), you should be able to
drop it into a new computer and run a repair using a WinXP CD to fix any
hardware discrepancies. If the hard drive is shot, well, I'll have to look
on Monday to see what model PLC our Oxford is running (and whether we have
the software CD, or could provide you with an image of our hard drive).

-Kevin

On Sat, May 4, 2019 at 8:49 AM Kevin M McPeak <kmcpeak at lsu.edu> wrote:

> Dear Colleagues,
>
> Does anyone have a copy of an old version (Black PLC) of Oxford's PC2000
> software?
>
> Our WinXP machine running the PC2000 software died this week and we can
> not find the original disk. Our PC2000 software was controlling an Oxford
> ICP100 with a black PLC (that is the older PLC which is not upgradeable).
>
> Any help here is most appreciated.
>
> Regards,
> Kevin
> --
> Assistant Professor
> Department of Chemical Engineering
> Director LSU Nanofabrication Facility
> 225.578.0058
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork
>


-- 
Kevin Owen
Senior Engineer in Research
Operations Group, Lurie Nanofabrication Facility
University of Michigan
(734) 545-4014
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20190504/6bf8a1db/attachment.html>