[labnetwork] Plasmaquest Model 145 software

[LaFleur, David W]

Hi Bob,

I looked up your system on the web and it looks nearly identical to 2 Nexx system we had here at Harvard. Same components, chamber, loadlock, even the enclosure panels are the same. Everything except the monitor, ours was not a touch screen. I wonder if they run the same software? Ours was windows 98 too. We have a backup hard drive with the software we can give to you to try. Do you have a picture of the main screen when it was operational? This is a long shot so if no one else responds you may want to give it a try as a last resort.

Regards,

David LaFleur
CNS Equipment Engineer

From: "labnetwork-bounces at mtl.mit.edu" <labnetwork-bounces at mtl.mit.edu> on behalf of "bic at mtl.mit.edu" <bic at mtl.mit.edu>
Date: Tuesday, November 19, 2019 at 1:01 PM
To: "labnetwork at mtl.mit.edu" <labnetwork at mtl.mit.edu>
Subject: [labnetwork] Plasmaquest Model 145 software



Hi All,

The tool software for our 1996 Plasmaquest Model 145 crashed the other day. It is on three, 3.5” floppy disks, (for Windows 95) and my copies got corrupted.
Does anyone have a copy to share?

Thanks,
Bob

-----------------------------------------------------------------

Robert J. Bicchieri

Research Specialist

Massachusetts Institute of Technology

MIT. Nano

60 Vassar St. Bldg. 39-215

Cambridge, MA 02139

Phone  617.253.6418

Fax      617.258.8500

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20191120/5762d806/attachment.html>