[labnetwork] Dektak 6M

[Mark A. Brunson]

Hi Chito,

You may want to contact Anthony Dao. He services a couple of our contact and optical profilometers.  He may have the part you need or have a source for it. His website is here <http://www.directadvop-us.com/index.html>.

Good luck!

Mark Brunson
Research Engineer
Washington Nanofabrication Facility
University of Washington
Fluke Hall 115, Box 352143
(206) 543-6267

> On Oct 7, 2019, at 3:53 PM, Chito Kendrick <cekendri at mtu.edu> wrote:
> 
> A tiny gear on the stage position knob of our dektak 6M has been stripped by a user. Bruker does not have parts for the system so I was hoping someone on the labnetwork might know someone who has parts for these systems? I am not sure I have enough left of the gear to draw up a design to get a new one made.
> 
> Chito Kendrick
> 
> -- 
> Chito Kendrick Ph.D. 
> 
> Chito Kendrick Website <https://sites.google.com/site/chitokendrickphd/>
> MTU Microfabrication Website <http://www.mtu.edu/microfabrication/>
> 
> Managing Director of the Microfabrication Facility
> Research Assistant Professor
> Electrical and Computer Engineering
> Michigan Technological University
> Room 436 M&M Building
> 1400 Townsend Dr.
> Houghton, Michigan 49931-1295
> 
> 814-308-4255
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20191007/1c165dc4/attachment.html>