[labnetwork] Nanospec 180 repair help
Matthew Moneck
mmoneck at andrew.cmu.edu
Tue Nov 10 22:22:18 EST 2020
Hi Bill,
Have you tried Brumley South (http://brumleysouth.com/crisis-support/995)? They do a lot of work with Nanometrics tools. Not sure they handle the 180, but it’s worth a try. They’re actually located just a few hours from NCSU.
Best Regards,
Matt
--
Matthew T. Moneck, Ph.D
Executive Manager, Claire & John Bertucci Nanotechnology Laboratory
Electrical & Computer Engineering | Carnegie Mellon University
5000 Forbes Avenue, Pittsburgh, PA 15213-3890
Phone: 412-268-5430
ece.cmu.edu<http://www.ece.cmu.edu>
nanofab.ece.cmu.edu<http://www.nanofab.ece.cmu.edu>
From: labnetwork-bounces at mtl.mit.edu <labnetwork-bounces at mtl.mit.edu> On Behalf Of Bill Kiether
Sent: Tuesday, November 10, 2020 4:11 PM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] Nanospec 180 repair help
Hello,
We have an ancient Nanospec 180 that is having some problems with measurement. Does anyone know a good repair shop that still works on these?
Bill Kiethe
wjkiethe at ncsu.edu<mailto:wjkiethe at ncsu.edu>
NCSU Nanofabrication Facility
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20201111/68b696af/attachment.html>
More information about the labnetwork
mailing list