[labnetwork] PDR-04 micromist coater
Manish Keswani
manish.keswani01 at gmail.com
Sat Oct 24 16:14:29 EDT 2020
Hello all,
We recently purchased a micromist coater PDR-04 and did some initial
testing using a negative photoresist to evaluate the effect of PR flow
rate, scan speed and pitch on coating thickness on a 4" silicon wafer. Our
results showed a film thickness of a few nm with a single pass. The
settings were based on the manufacturer's recommendations (3-6 ml/hr, 20-40
mm/s, 1-2 mm pitch, 430 microns nozzle). I would like to know if such small
film thickness with a single coat is normal. Any input will be
greatly appreciated.
Thank you,
Manish Keswani
Lawrence Livermore National Laboratory
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20201024/92b594dc/attachment.html>
More information about the labnetwork
mailing list