[labnetwork] Resin blade

[Macdonald, Robert (GE Research, US)]

Disco or Thermocarbon would be my next try..

Thermocarbon: dicing.com

Disco: https://technology.discousa.com/index.html

From: labnetwork <labnetwork-bounces at mtl.mit.edu> On Behalf Of Christophe Clément
Sent: Monday, December 13, 2021 11:49 AM
To: labnetwork at mtl.mit.edu
Subject: EXT: [labnetwork] Resin blade

WARNING: This email originated from outside of GE. Please validate the sender's email address before clicking on links or attachments as they may not be safe.

Hello community

I tried to purchase blades from ADT today and the lead time for having resin blades (75 micron grit, 8 mil thick, 2.25 inch OD) is 6 month....It used to be less than a month last year.
Can you please share your supplier's contact information where you purchase similar blades?

Thank you !
Christophe

Christophe Clément
Technicien laboratoire
Laboratoire de microfabrication (LMF)
Groupe des Couches Minces (GCM) www.gcmlab.ca<http://www.gcmlab.ca/>
Ecole Polytechnique de Montréal www.polymtl.ca<http://www.polymtl.ca/>
Département de génie physique
* 2900 Boulevard Edouard Monpetit
Pavillon JAB
Campus de l'Université de Montréal
Montréal (Québec) H3T 1J4

* christophe.clement at polymtl.ca<mailto:christophe.clement at polymtl.ca>
* 514 340 4711 #2417
Fax : 514 340 5195


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20211213/430ad88b/attachment.html>