[labnetwork] Dektak 150 Service

[Dennis Culver]

Hello All,Dennis Culver from Culver Consulting.
FYI  I continue to support Veeco/Sloan Legacy systems such as the Dektak II, IIA, IID, 3030, 3030 Auto 1 [can no longer support the 3030 Auto II programmable stage or automation however I can still keep the base profiler operational] Dektak 3030ST, Dektak 3 and D3ktak 3ST systems.  I am now dropping legacy support of the Dektak "V" series systems as much of the motion controller section is obsolete and can't be supported.  No replacements available.  Bruker has chosen not to allow outside support of their Legacy systems in favor of letting those systems die so you are stuck with replacing them.
I continue to support Veeco ion beam etching systems such as the ME 301, ME 302, ME 601, ME 602 & ME 1001 systems to include gauge controllers and power supplies.  
When in doubt, please contact me directly.
Dennis J.  Culver  Culver Consulting
5960 Valentine RoadUnit 14, Mail box 13Ventura, CA 93003
Ph (805) 648-1184Fx (805) 648-1485
Cell(805)680-7389
dennis at culverequipment.com
-----Original Message-----
From: Albert William (Bill) Flounders <bill_flounders at berkeley.edu>
To: Beaudoin, Mario <beaudoin at physics.ubc.ca>
Cc: Fab Network <labnetwork at mtl.mit.edu>
Sent: Fri, Jul 30, 2021 10:17 am
Subject: Re: [labnetwork] Dektak 150 Service

>From Previous LabNet posts (many years old) 
but the website for culverequipment.com is still live

Dennis J.  Culver
Culver Consulting
57 W. McFarlane St.
Ventura, CA 93001
Ph (805) 648-1184
Fx (805) 648-1485
Cell (805)680-7389
dennis at culverequipment.com
Website: www.culverequipment.com
HR CONSULTING 
DEKTAK REPAIR SERVICE & SALES
590 E. GUTIERREZ ST. STE. C. 
SANTA BARBARA, CA 93103
UNITED STATES
Phone: 805.845.1618.
Cell: 805.680.1368
Fax: 805.845.1619
E-mail: hr-consulting at cox.net

On Fri, Jul 30, 2021 at 9:22 AM Beaudoin, Mario <beaudoin at physics.ubc.ca> wrote:

  Bruker bought this from Veeco I believe. Mario
  On 2021-07-29 8:44 a.m., James Mitchell wrote:
  
 
| [CAUTION: Non-UBC Email] |

  Does anyone know of someone who supports this tool? It is a stylus profilometer. 
  Thanks, Jim 
  -- 
        James Mitchell Specialty Trades Technician Dept. of Electrical and Computer Engineering NCSU Nanofabrication Facility MRC RM243A Box 7911
  2410 Campus Shore Dr., Raleigh, NC 27606 jtmitch5 at ncsu.edu Desk: 919-515-5394 Cell: 919-717-7325 
           
  _______________________________________________
labnetwork mailing list
labnetwork at mtl.mit.edu
https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork
 
 -- 
  _______________________________________________
labnetwork mailing list
labnetwork at mtl.mit.edu
https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork

_______________________________________________
labnetwork mailing list
labnetwork at mtl.mit.edu
https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20210730/1021af36/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Mario Beaudoin SBQMI sig 2.jpg
Type: image/jpeg
Size: 21446 bytes
Desc: not available
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20210730/1021af36/attachment.jpg>