[labnetwork] SUSS mask aligners spare parts
Huoth, Kalvin - 0835 - MITLL
Kalvin.Huoth at ll.mit.edu
Sun Jun 26 08:58:00 EDT 2022
Hi Nava,
Try Mark Anderson at AlignTech LLC, he went through our MA6 DVCU when it had
issues Grabbing image, split screen and left/right microscope. Below is his
contact information. He's located in Westford Vermont.
Markanderson150 at gmail.com <mailto:Markanderson150 at gmail.com>
Cell 1-802-878-0199
Regards,
Kalvin Huoth
MIT Lincoln Laboratory
244 Wood Street
Lexington, MA. 02421
From: labnetwork <labnetwork-bounces at mtl.mit.edu> On Behalf Of Lewis,William
Sent: Thursday, June 23, 2022 9:01 AM
To: Nava Ariel-Sternberg <na2661 at columbia.edu>; labnetwork at mtl.mit.edu
Subject: Re: [labnetwork] SUSS mask aligners spare parts
Hi Nava,
We had the same failure on our MA6. We purchased a new VCU from Suss and it
didn't fix the issue. There was a signal loss somewhere else in the system.
So... I bypassed the Suss video system entirely and bought video processor
(link below to similar)and just connected left and right microscope cameras
to the video processor. This provides split screen live image of left and
right cameras. It's been like this for about 10 years and works fine for
us. You lose the ability to store an overlayed image (i.e. Grab Image Key)
for alignment needed for high mag alignment. We get around that by marking
the monitor screen with a Sharpie. Sounds crude but works great! The new
$8000 Suss Video Controller Unit was a waste of money in our case.
https://www.amazon.com/UHPPOTE-Channel-Splitter-Processor-Control/dp/B06WD13
LTB
Bill Lewis
Research Service Center
University of Florida
1041 Center Dr
Gainesville, FL 32611
walewis at ufl.edu <mailto:walewis at ufl.edu>
3five2-258-zero5zero7
https://rsc.aux.eng.ufl.edu/
From: labnetwork <labnetwork-bounces at mtl.mit.edu
<mailto:labnetwork-bounces at mtl.mit.edu> > On Behalf Of Nava Ariel-Sternberg
Sent: Wednesday, June 22, 2022 9:27 AM
To: labnetwork at mtl.mit.edu <mailto:labnetwork at mtl.mit.edu>
Subject: [labnetwork] SUSS mask aligners spare parts
[External Email]
Hi all,
It was great to see everyone at the UGIM earlier this month.
We need to replace the video card of our SUSS mask aligner (MA6). Lead time
from the vendor is 6 months.
Any leads on alternative vendors for mask aligners parts would be greatly
appreciated!
Thanks,
Nava
Dr. Nava Ariel-Sternberg
Senior Director of CNI Labs
Columbia University
CEPSR/MC 8903
530 west 120th st. NY
NY 10027
Office: 212-8549927
Cell: 201-5627600
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20220626/e7171931/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 5645 bytes
Desc: not available
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20220626/e7171931/attachment.p7s>
More information about the labnetwork
mailing list