[labnetwork] Gas Panel Vendor

[Brian K. Olmsted]

I've used Swagelok for custom gas panels in the past and they have been
reasonably priced with excellent workmanship.

thanks,

Brian

On Tue, Mar 29, 2022 at 10:49 AM William Kiether <wjkiethe at ncsu.edu> wrote:

> Hello,
>
> Does anyone have a good vendor for making panels (regulator, purging
> lines, etc see attached pic). Most of our gas cabinets use a Spectra Gas
> panel, but they are ~30 years old, and the company no longer exists. Our
> newest vendor (not named) has become very expensive ($17K) for a six valve
> panel for silane.  Who have you used, and what is the ballpark range for a
> six valve panel for toxics/flammables?
>
> Bill Kiether
> NCSU Nanofabrication Facility
> wjkiethe at ncsu.edu
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20220329/f9533b11/attachment.html>