[labnetwork] Intercom / Paging System
Todd Merport
merport at gmail.com
Fri Jul 5 13:53:02 EDT 2013
Hi Ryan,
I don't recall the specifics too well. The PA amplifier had multiple
inputs, one was from the PBX. I recall that speaker placement in the fab
required some fine tuning. My task was limited to getting a network
connection to the synthesizer and routing the analog output to the paging
amplifier.
On Fri, Jul 5, 2013 at 10:28 AM, Ryan Taylor <ryant at nanofab.utah.edu> wrote:
> A voice synthesizer is a useful tool for a lab. Messages entered on a web
>> page can be passed through a synthesizer into the PA system (leaving out
>> intermediate steps). It also allows automated messages to be broadcast.
>>
> Thanks! That's a good tip. Do you have any suggestions for the hardware
> part of the system (speakers, amplifiers, etc.)?
>
> Thanks,
> Ryan
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20130705/b8b3fa56/attachment.html>
More information about the labnetwork
mailing list