[labnetwork] Bending coaxial

[Matthieu Nannini, Dr.]

Dear colleagues,

A local company is proposing to bend coaxial SS tubing to install a double containment gas line thus removing the need for welded 90° elbows. did you ever see that ? Any comment would be helpful !

Thanks

Matthieu Nannini

Début du message réexpédié :

De: "Matthieu Nannini, Dr." <matthieu.nannini at mcgill.ca<mailto:matthieu.nannini at mcgill.ca>>
Objet: Bending coaxial
Date: 15 décembre 2014 15:31:10 UTC−5
À: Tom Britton <tbritton at criticalsystemsinc.com<mailto:tbritton at criticalsystemsinc.com>>

Hi tom,

A local company here can bend coaxial tubing. They quoted me 4800$ for the 2 lines BCl3 and SiCl4.

What do you think of bending ? They told me the 1/4 wasn’t kinked at all.

Matthieu


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20141217/3e82c79c/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Coude plier avec bulkhead adaptateur.pdf
Type: application/pdf
Size: 423616 bytes
Desc: Coude plier avec bulkhead adaptateur.pdf
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20141217/3e82c79c/attachment.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: coupe interieur.pdf
Type: application/pdf
Size: 389370 bytes
Desc: coupe interieur.pdf
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20141217/3e82c79c/attachment-0001.pdf>