[labnetwork] KLA/T P15 profiler video frame grabber

[Gregg Cure]

Hi Tom -
Thank you!
Yes, I have been checking eBay - I found a later rev card - I would expect
I'd need to over write the existing driver set however, and I'm not sure
that the P15's software would "behave".
Here is a fairly detailed photo of our current frame-grabber.
Thanks again,
Gregg


On Mon, Mar 3, 2014 at 9:03 PM, Tom Norment <tom at brumleysouth.com> wrote:

> We should be able to help you.
>
>
>
> Don't forget to check Ebay also.
>
>
>
> I need a picture of the PCI board showing the front.
>
>
>
> Let you know ASAP, after you get it to me.
>
>
>
>
>
> Best Regards,
>
>
>
> Tom Norment
>
> Specialist
>
>
>
> Brumley South, Inc.
>
> 422 North Broad Street
>
> Mooresville, NC 28115
>
> Tel: 704-664-9251
>
> Fax: 704-664-9246
>
> tom at brumleysouth.com
>
> www.brumleysouth.com
>
>
>

-- 
Gregg D. Cure`
The University of Arizona
Arizona Research Laboratories
Nano Fabrication and Processing Center
1230 E. Speedway Blvd.
P.O. Box 210104
Tucson, AZ 85721-0104
Office: 520.626.1987
Cell: 520.307.2760
Fax: 520.626.7877
Website: http://mfc.engr.arizona.edu
Website: http://www.arl.arizona.edu/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20140304/1ad12936/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IntTech 9400-00173.jpg
Type: image/jpeg
Size: 515975 bytes
Desc: not available
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20140304/1ad12936/attachment.jpg>