[labnetwork] EV620 win98 spare computer
smitha nair
smithanair82 at gmail.com
Thu Oct 11 09:38:06 EDT 2018
Hello Chito ,
We have an EVG 620 system which is running with Win 2000. We recently
faced the same issue as you had mentioned . I can share with you my
experiences :
Issue noticed : random booting error, screen stuck with "applying
settings"". Also our IT team figured out problem with motherboard .
Outline :
1. multiple restart worked few times , then the system crashed.
2. We tried to do motherboard local servicing , and after a long
duration we got it done.
3. EVG said they can re install the software provided we get the
licensed version of Win 2000. We had the cloned HDD.
4. We were lucky to get an old CPU ( we even looked into the CPU's used
by our senior students to get an older version ) , which matched the
hardware configuration . But we had trouble with the LAN connection.
5. We had purchased both EVG 620 and EVG Bonder together . The CPU
configuration matched and Bonder did not require the LAN. We have heavy
use of EVG 620 , hence connected the Bonder CPU to EVG with repaired
motherboard . It all worked well .
6. EVG CPU we connected to the Bonder later .
7. As you mentioned the option of upgrade was not very feasible for us.
We could, after long wait, get the tool up. EVG supported us by providing
registration code multiple times, till we got the tool working.
Regards
Smitha Nair
Technology Manager
National Nanofabrication Centre (NNFC),
Centre for Nano Science and Engineering (CeNSE),
Indian Institute of Science (IISc),
Bangalore-560012.
smithanair at iisc.ac.in
On Wed, Oct 10, 2018 at 9:08 PM Chito Kendrick <cekendri at mtu.edu> wrote:
> Our EV620 is running win98 and the cost EVG was talking to upgrade it to
> the latest windows was above what I am willing to pay. It would not just be
> the computer that needed upgrading but also parts of the hardware also.
>
> We have a cloned HDD of the computer, but that would only be good in case
> the HDD failed and we wanted to put it back into the same computer.
>
> What I want to do is build a secondary computer with a cloned HDD, as our
> win98 computer is showing signs of failing - random crashing, not properly
> booting, forgetting drives (drives that are not used but errors are
> appearing). In my experience you can not just put a HDD into a new computer
> as it will have to load in drivers for the motherboard and other hardware
> changes (unless you have the same hardware - which I will likely not). The
> other concern is if I move the EV620 boards from one computer to another if
> they will be recognized or if they also have a license key - last thing I
> need is the system down as the boards will not be recognized by either
> computer.
>
> Has anyone done this with their systems that are running older operating
> systems.
>
> Chito Kendrick
> --
> Chito Kendrick Ph.D.
>
> Chito Kendrick Website <https://sites.google.com/site/chitokendrickphd/>
> MTU Microfabrication Website <http://www.mtu.edu/microfabrication/>
>
> Managing Director of the Microfabrication Facility
> Research Assistant Professor
> Electrical and Computer Engineering
> Michigan Technological University
> Room 436 M&M Building
> 1400 Townsend Dr.
> Houghton, Michigan 49931-1295
>
> 814-308-4255
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20181011/dcc00c0b/attachment.html>
More information about the labnetwork
mailing list