[labnetwork] Clean room / Nanofab temp/
Matthew Moneck
mmoneck at andrew.cmu.edu
Mon Mar 18 20:03:24 EDT 2019
Hi Patrick,
Our systems are set to target 68 deg +/- 0.5 deg and 40% +/- 1%.
Best Regards,
Matt
--
Matthew T. Moneck, Ph.D.
Executive Manager, Claire & John Bertucci Nanotechnology Laboratory
Electrical and Computer Engineering | Carnegie Mellon University
5000 Forbes Ave., Pittsburgh, PA 15213-3890
T: 412.268.5430
F: 412.268.3497
www.ece.cmu.edu<http://www.ece.cmu.edu/>
nanofab.ece.cmu.edu
From: labnetwork-bounces at mtl.mit.edu [mailto:labnetwork-bounces at mtl.mit.edu] On Behalf Of Johnson, Patrick
Sent: Monday, March 18, 2019 3:08 PM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] Clean room / Nanofab temp/
Hello Colleagues, what do the other NanoFabs basically have there cleanrooms temp and humidity specs set at? I have been in Semiconductor since 1995 and 67F +/- 1 degree and humidity 45-47% is what I have encountered. I appreciate any input from the LabNetwork partners. Thanks Patrick
Patrick Johnson
George Washington University
Nano Fabrication Lab Manager
Science and Engineering Hall
800 NW 22nd Street Rm-B2815
Washington D.C. 20052
Cell 703 258 2465
Desk 202 994 2346
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20190319/ff80c7ef/attachment.html>
More information about the labnetwork
mailing list