[labnetwork] laboratory sputter deposition equipment

[Albert William (Bill) Flounders]

I encourage evaluation of KJ Lesker
Bill Flounders
UC Berkeley


Contact:
Pierre Hraiz
Regional Sales Manager
Tel: *408-335-5779* <408-335-5779> (direct)
| Cell: *(408) 335-5779* <(408)%20335-5779>
| Email: *pierreh at lesker.com* <pierreh at lesker.com>


On Fri, Jul 17, 2020 at 5:49 AM Guido Janssen - 3ME <
G.C.A.M.Janssen at tudelft.nl> wrote:

> Dear colleagues
>
> Here in Delft we are in the proces of replacing our 16 years old AJA
> sputter tool, used for proces development and materials science studies.
> We’re looking for a system with three 2” targets in sputter down
> configuration able to handle small samples as well as 100 mm wafers. DC and
> RF, heated substrate holder with sample bias option, turbo pumped and
> equiped with a load lock.
> Do you know of any supplier other than AJA that offers such a system?
>
> Sincerely
> Guido Janssen
> TU Delft
> g.c.a.m.janssen at tudelft.nl
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20200717/175d915c/attachment.html>