[labnetwork] Vacuum Oven Controls

[Morrison, Richard H., Jr]

Hi,

We use the little controllers from Omega see the link below, they work great.

https://www.omega.com/en-us/control-monitoring/controllers/c/pid-controllers

Rick


Richard Morrison
PMTS
Draper Laboratory
555 Technology Square
Cambridge Ma  02139
Office: 617-258-3420
Cell: 508-930-3461



From: labnetwork <labnetwork-bounces at mtl.mit.edu> On Behalf Of Shaloma M Malveaux
Sent: Monday, July 12, 2021 2:39 PM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] Vacuum Oven Controls

Are there any labs using controllers to program heat, ramp, dwell and cool down parameters for vacuum ovens or other heating sources?  If so, what is a recommended brand that is easily programmed from the controller?  Also, interested in companies that have reliable technical support and repair service.  We have a Heraeus brand vacuum oven.

Shaloma Malveaux
Louisiana State University/CAMD
Nanofabrication Facility (NFF)
6980 Jefferson Highway
Baton Rouge, LA  70806
Phone: (225) 578-9343
lsu.edu/nanofabrication<http://lsu.edu/nanofabrication>

________________________________
Notice: This email and any attachments may contain proprietary (Draper non-public) and/or export-controlled information of Draper. If you are not the intended recipient of this email, please immediately notify the sender by replying to this email and immediately destroy all copies of this email.
________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20210712/8c2c8d1e/attachment.html>