[labnetwork] NanoSpec 6100 service/repair vendor recommendations

[Matthew Moneck]

Hi Brian,

We have worked with Brumley South in the past (http://www.brumleysouth.com).  The handle a lot of Nanometrics and KLA systems.

Best Regards,

Matt

--
Matthew T. Moneck, Ph.D
Executive Manager, Claire & John Bertucci Nanotechnology Laboratory
Electrical & Computer Engineering | Carnegie Mellon University
5000 Forbes Avenue, Pittsburgh, PA 15213-3890
Phone:  412-268-5430
ece.cmu.edu<http://www.ece.cmu.edu>
nanofab.ece.cmu.edu<http://www.nanofab.ece.cmu.edu>

From: labnetwork-bounces at mtl.mit.edu <labnetwork-bounces at mtl.mit.edu> On Behalf Of Brian Armstrong
Sent: Monday, March 15, 2021 2:06 PM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] NanoSpec 6100 service/repair vendor recommendations

Hi all,

Does anyone have recommendations for vendors that can provide service/repair at your site for Nanometrics NanoSpec 6100 thin film measurement systems?

We're trying to decide if it's worth continuing with our current system or if the time has come to purchase a new system that is supported by the vendor.  Our most recent experience with a repair vendor was rather disappointing in part due to shipping our system to the vendor site.  Old electronics do not travel well!

Best Regards,
Brian Armstrong

Lead Engineer in Research
Lurie Nanofabrication Facility (LNF)
University of Michigan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20210315/be58e2b2/attachment.html>