[labnetwork] Software and drivers for K&S 7100-4D Dicing Saw

[Kevin M McPeak]

Dear Colleagues,

Thanks to everyone who provided input on obtaining new software/hardware for the K&S/ADT 7100 dicing saw. Our latest challenge is shipping the saw from Sandia National Lab to Baton Rouge, LA.

ADT recommends installing two yellow securing jigs (see attached pdf) before we ship the 7100. Unfortunately, ADT doesn't have these jigs in stock and it will take 6 weeks to build them, which is longer then the DOE is willing to store the tool.

By chance does anyway have these yellow jigs lying around that we could borrow? I will pay for shipping both ways. Fingers crossed!

Regards,
Kevin

________________________________________
From: labnetwork <labnetwork-bounces at mtl.mit.edu> on behalf of Kevin M McPeak <kmcpeak at lsu.edu>
Sent: Thursday, November 11, 2021 4:46 PM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] Software and drivers for K&S 7100-4D Dicing Saw

Dear Colleagues,

The LSU nanofabrication facility is getting a K&S 7100-4D Dicing Saw from the DOE equipment donation program. Unfortunately, the DOE is removing the hard drive per their privacy rules. I have reached out to KNS by phone and email but so far I have not had any luck getting a response.

Do you any of you have a good contact at KNS that I could ask about getting software and drivers for this tool? Thanks!

Regards,
Kevin

--
Kevin M. McPeak
Associate Professor | LSU Dept. of Chemical Engineering
225-578-0058 | mcpeaklab.com | lsu.edu/nanofabrication


_______________________________________________
labnetwork mailing list
labnetwork at mtl.mit.edu
https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmtl.mit.edu%2Fmailman%2Flistinfo.cgi%2Flabnetwork&data=04%7C01%7Ckmcpeak%40lsu.edu%7Cac88533ec96848827db508d9a5787b99%7C2d4dad3f50ae47d983a09ae2b1f466f8%7C0%7C0%7C637722759156630260%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=d4BXo3bxrJHH6WkbJV3IM%2B30EfPUqJTidjFaXXJzDJk%3D&reserved=0
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ADT_7100_securing_jigs.pdf
Type: application/pdf
Size: 323874 bytes
Desc: ADT_7100_securing_jigs.pdf
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20211130/6c682b35/attachment.pdf>