[labnetwork] Software and drivers for K&S 7100-4D Dicing Saw

[Shimon Eliav]

Hi Kevin,

We have a set of those brackets, see picture below.

Let's be in touch to close the delivery details.

Regards,

Shimon



[cid:image001.jpg at 01D7E604.6A1BBF60]





-----Original Message-----
From: labnetwork [mailto:labnetwork-bounces at mtl.mit.edu] On Behalf Of Kevin M McPeak
Sent: Tuesday, 30 November 2021 5:27
To: labnetwork at mtl.mit.edu
Subject: Re: [labnetwork] Software and drivers for K&S 7100-4D Dicing Saw



Dear Colleagues,



Thanks to everyone who provided input on obtaining new software/hardware for the K&S/ADT 7100 dicing saw. Our latest challenge is shipping the saw from Sandia National Lab to Baton Rouge, LA.



ADT recommends installing two yellow securing jigs (see attached pdf) before we ship the 7100. Unfortunately, ADT doesn't have these jigs in stock and it will take 6 weeks to build them, which is longer then the DOE is willing to store the tool.



By chance does anyway have these yellow jigs lying around that we could borrow? I will pay for shipping both ways. Fingers crossed!



Regards,

Kevin



________________________________________

From: labnetwork <labnetwork-bounces at mtl.mit.edu<mailto:labnetwork-bounces at mtl.mit.edu>> on behalf of Kevin M McPeak <kmcpeak at lsu.edu<mailto:kmcpeak at lsu.edu>>

Sent: Thursday, November 11, 2021 4:46 PM

To: labnetwork at mtl.mit.edu<mailto:labnetwork at mtl.mit.edu>

Subject: [labnetwork] Software and drivers for K&S 7100-4D Dicing Saw



Dear Colleagues,



The LSU nanofabrication facility is getting a K&S 7100-4D Dicing Saw from the DOE equipment donation program. Unfortunately, the DOE is removing the hard drive per their privacy rules. I have reached out to KNS by phone and email but so far I have not had any luck getting a response.



Do you any of you have a good contact at KNS that I could ask about getting software and drivers for this tool? Thanks!



Regards,

Kevin



--

Kevin M. McPeak

Associate Professor | LSU Dept. of Chemical Engineering

225-578-0058 | mcpeaklab.com | lsu.edu/nanofabrication





_______________________________________________

labnetwork mailing list

labnetwork at mtl.mit.edu<mailto:labnetwork at mtl.mit.edu>

https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmtl.mit.edu%2Fmailman%2Flistinfo.cgi%2Flabnetwork&data=04%7C01%7Ckmcpeak%40lsu.edu%7Cac88533ec96848827db508d9a5787b99%7C2d4dad3f50ae47d983a09ae2b1f466f8%7C0%7C0%7C637722759156630260%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=d4BXo3bxrJHH6WkbJV3IM%2B30EfPUqJTidjFaXXJzDJk%3D&reserved=0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20211130/1a405496/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 65985 bytes
Desc: image001.jpg
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20211130/1a405496/attachment.jpg>