[labnetwork] RIE through Silicon
Jeremy Upham
jupham at gmail.com
Mon Apr 11 23:07:42 EDT 2022
I think your plan could work, so I'm not sure that I see the problem
In my experience the carbon in the PR can contribute to the plasma
chemistry and affect the etch, so I tend to use vacuum grease as a
thermally conducting binder between the etched sample and the backing wafer
instead. Though your system may well work for your recipe.
Hope that helps,
Jer Upham PhD
Senior Lab Manager / Research Scientist
Quantum Photonics Group
University of Ottawa
Tel.: 1 (613) 562-5800 ext 7325
On Mon, Apr 11, 2022 at 6:54 PM Chang, Long <lvchang at central.uh.edu> wrote:
> *Attention : courriel externe | external email*
> Hi Guys,
>
> I have an Oxford RIE with backside Helium. I want to etch through the
> silicon wafer (380um thick). The largest pattern is a 1mm diameter circle.
> My plan is to ride the 4” sample wafer on a 4" carrier wafer with PR. Does
> anyone have a good solution to this problem?
>
> Thanks,
> Long
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20220411/f534ed83/attachment.html>
More information about the labnetwork
mailing list