[labnetwork] Drytek Dry Pumps

[Football]

Dave,

We have a Drytek PS80 that came with a system when the system was
purchased. I found that it has been really hard to get any response,
feedback or support from a Drytek's rep....

Thanks,



*Fubo Rao, Ph.D.,*

*Nanofabrication Cleanroom Manager,*

*Center for Nanoscale Materials,*

*Argonne National Laboratory*

*9700 S. Cass Ave, Lemont, IL 60439*

*Phone: 630-252-5708*

*Email: **frao at anl.gov* <frao at anl.gov>

On Fri, Jul 29, 2022 at 12:29 PM Hollingshead, Dave <hollingshead.19 at osu.edu>
wrote:

> Hi all,
>
>
>
> Does anyone have experience (good, bad, or otherwise) with Drytek dry
> screw pumps (specifically as a turbo backing pump for an ICP etcher)? Most
> of the dry pumps in our lab are Edwards, but since lead times have recently
> become a major issue we are considering alternatives.
>
>
>
> Thanks,
>
> -Dave
>
>
>
> *Dave Hollingshead *
> Manager of Research Operations – Nanotech West Lab
> *The Ohio State University*
>
> Suite 100, 1381 Kinnear Road, Columbus, OH 43212
> 614.292.1355 Office
> hollingshead.19 at osu.edu osu.edu
>
>
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20220729/46bf0825/attachment.html>