[labnetwork] Forming gas: 5% or 10% hydrogen
Dan P. Woodie
daniel.woodie at princeton.edu
Thu Feb 29 16:35:11 EST 2024
I can’t offer anything with regards to the efficacy of a given percentage of hydrogen for the semiconductor annealing benefits, but one other item to consider is that hydrogen greater than 2.9% in nitrogen is rated as flammable, while you can go up to 5.9% in argon and still remain nonflammable. Depending on your local fire codes and regulations, that may make a difference.
Additionally, some researchers prefer argon over nitrogen to avoid any risk of a nitrogen reaction with their substrate.
Dan
Daniel Woodie
Director, Micro/Nano Fabrication Center, Princeton Materials Institute
From: labnetwork <labnetwork-bounces at mtl.mit.edu> On Behalf Of Jing Guo
Sent: Thursday, February 29, 2024 3:17 PM
To: Golan Tanami <golant at savion.huji.ac.il>
Cc: labnetwork at mtl.mit.edu
Subject: Re: [labnetwork] Forming gas: 5% or 10% hydrogen
Hi Mario,
We also use 5% H2 in N2 as our forming gas on RTP system.
Jing
---------------------------------------
Jing Guo Ph.D.
Research Scientist
SEA Cleanroom (SST 017)
Rice University
Houston, TX
jeanne.guo at rice.edu<mailto:jeanne.guo at rice.edu>
713-348-8227
On Feb 29, 2024, at 6:35 AM, Golan Tanami <golant at savion.huji.ac.il<mailto:golant at savion.huji.ac.il>> wrote:
Hi Mario,
I don’t know about “the best”, but in our RTA, we use 5% H2 and 95% N2. I think it’s pretty standard.
Anyway, nobody complained yet 😊
Best regards,
Golan.
<image001.jpg>
Golan A. Tanami, PhD | Head of the Unit for Nanofabrication (UNF)
Center for Nanoscience and Nanotechnology
Edmond J. Safra Campus
The Hebrew University of Jerusalem
T +972.2.6584179 | M +972.50.9891111
golant at savion.huji.ac.il<mailto:golant at savion.huji.ac.il>
follow us on Facebook<https://www.facebook.com/hujinanocenter/> @hujinanocenter
From: labnetwork <labnetwork-bounces at mtl.mit.edu<mailto:labnetwork-bounces at mtl.mit.edu>> On Behalf Of Beaudoin, Mario
Sent: Tuesday, February 27, 2024 10:27 PM
To: labnetwork at mtl.mit.edu<mailto:labnetwork at mtl.mit.edu>
Subject: [labnetwork] Forming gas: 5% or 10% hydrogen
Dear Network,
We're setting up a new RTA and will run it with Ar, N2 and forming gas. We're uncertain about the % level of hydrogen we want in our forming gas. Can someone recomment the best hydrogen % to use for MOS capacitor annealing?
Regards,
Mario
--
<image002.jpg>
_______________________________________________
labnetwork mailing list
labnetwork at mtl.mit.edu<mailto:labnetwork at mtl.mit.edu>
https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20240229/c43e9709/attachment.html>
More information about the labnetwork
mailing list