[labnetwork] question about spin rinse dryer
Bowser, Jerry
jerry.bowser at nist.gov
Fri Aug 1 08:59:22 EDT 2014
Hello Xiaojin,
Here at NIST we have used Sitek Solutions and Modular Process for SemiTool parts. Here is the contact info:
Sitek
Karen Henry
916-797-9000 x 17
khenry at sitekprocess.com<mailto:khenry at sitekprocess.com>
Micro Process
Charles Brown
cbrown at microprocesstech.com<mailto:cbrown at microprocesstech.com>
Hope this helps
Best,
Jerry Bowser
NIST
CNST NanoFab
From: labnetwork-bounces at mtl.mit.edu [mailto:labnetwork-bounces at mtl.mit.edu] On Behalf Of Wang,Xiaojin
Sent: Thursday, July 31, 2014 3:20 PM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] question about spin rinse dryer
Dear colleagues:
We have a spin rinse dryer from semitool that has been down lately. After I discussed with technical support several times, the problem boil down to the motor controller whose part number is 60710-27. The picture is attached. Does anyone know where to repair this part besides OEM? Or does anyone have an old working one that we can purchase? Thank you.
Xiaojin Wang
Senior micro/nano process engineer
Micro/nano technology center
University of Louisville
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20140801/fe2a31c7/attachment.html>
More information about the labnetwork
mailing list