[labnetwork] Sputtering PTFE

[Mike Simmons]

Hi Fouad,

We can sputter PTFE in our application lab in roll to roll format by DC 
or pulsed DC planar magnetron, and by mid frequency AC dual rotary 
magnetrons, on widths up to 330 mm.  We can also coat discrete parts if 
thin enough to be relatively flexible or if rigid and small in size.  
The machine we use for this, an R2R330, also has inline plasma treatment 
prior to deposition which is important for materials like PTFE.  We'd be 
glad to speak further with your user.

Best regards,
Mike

*Mike Simmons, P.E.*
President, INTELLIVATION LLC
1230 Blue Spruce Drive, Suite 3 *|* Fort Collins, CO 80524, USA
+1 (970) 692-2335 *office**|* +1 (888) 800-9561 *fax***
www.intelli-vation.com

On 8/9/2017 5:52 PM, Fouad Karouta wrote:
>
> Hi all,
>
> We have a suer looking to sputter teflon (PTFE), I wonder if there is 
> any facility in the network capable of sputtering PTFE.
>
> Thanks, Fouad
>
> *************************************
>
> Manager ANFF ACT Node
>
> Australian National Fabrication Facility
>
> Research School of Physics and Engineering
>
> L. Huxley Building (#56), Mills Road, Room 4.02
>
> Australian National University
>
> ACT 0200, Canberra, Australia
>
> Tel: + 61 2 6125 7174
>
> Mob: + 61 451 046 412
>
> Email: fouad.karouta at anu.edu.au <mailto:fouad.karouta at anu.edu.au>
>
> http://anff-act.anu.edu.au/
>
>
>
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://www-mtl.mit.edu/mailman/listinfo.cgi/labnetwork

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20170810/0ad0d813/attachment.html>