[labnetwork] Flip Chip Bonding needs

[Robert Avila]

Good to see Dr. Khbeis and others respond.

Finetech has die bonders installed at many Universities…to name a few and my apologies for those I missed –

University of Arizona,
University of Arizona State
Cal Berkeley
Cal Davis
Stanford
Cal Tech
University of Washington
University of Louisville
University of Colorado State
University of Alaska
University of Alberta
University of Arkansas
University of S.Florida
MIT
Harvard
Rice



Regards,
Robert Avila
(')480.231.7902 mobile
(')480-893-1630 office
finetechusa.com<http://www.finetechusa.com/> •


From: labnetwork-bounces at mtl.mit.edu [mailto:labnetwork-bounces at mtl.mit.edu] On Behalf Of julia.aebersold at louisville.edu
Sent: Tuesday, March 14, 2017 7:25 AM
To: Michael Khbeis <khbeis at uw.edu>; Kamal Yadav <kamal.yadav at gmail.com>
Cc: labnetwork at mtl.mit.edu
Subject: Re: [labnetwork] Flip Chip Bonding needs

We also have flip chip bonding capabilities.  50kg seems quite a bit and would crush most silicon and/or glass substrates.

Cheers!

Julia Aebersold, Ph.D.
Cleanroom Manager
Micro/Nano Technology Center
University of Louisville
Shumaker Research Building, Room 233
2210 South Brook Street
Louisville, KY  40292

502-852-1572
http://louisville.edu/micronano/

From: labnetwork-bounces at mtl.mit.edu<mailto:labnetwork-bounces at mtl.mit.edu> [mailto:labnetwork-bounces at mtl.mit.edu] On Behalf Of Michael Khbeis
Sent: Tuesday, March 14, 2017 7:55 AM
To: Kamal Yadav <kamal.yadav at gmail.com<mailto:kamal.yadav at gmail.com>>
Cc: labnetwork at mtl.mit.edu<mailto:labnetwork at mtl.mit.edu>
Subject: Re: [labnetwork] Flip Chip Bonding needs

Kamal

We can accommodate. What type of bond?

Best,
Dr. Michael Khbeis
Washington Nanofab Facility
University of Washington
Fluke Hall, Box 352143
(O) 206.543.5101<tel:206.543.5101>
(C) 443.254.5192<tel:443.254.5192>
khbeis at uw.edu<mailto:khbeis at uw.edu>

On Mar 13, 2017, at 2:17 PM, Kamal Yadav <kamal.yadav at gmail.com<mailto:kamal.yadav at gmail.com>> wrote:
Dear All,

Kindly let me know if you know or if you can provide flip chip bonding services at a University cleanroom or similar, on the west coast preferably [due to our own location], but we are open to other places as well.

Bonding force required: Around 50 Kg
Die Size: 5 mm to 35 mm.
Alignment: 5 micron or better.

--
Thanks,
Kamal

_______________________________________________
labnetwork mailing list
labnetwork at mtl.mit.edu<mailto:labnetwork at mtl.mit.edu>
https://www-mtl.mit.edu/mailman/listinfo.cgi/labnetwork<https://urldefense.proofpoint.com/v2/url?u=https-3A__www-2Dmtl.mit.edu_mailman_listinfo.cgi_labnetwork&d=AwMFaQ&c=SgMrq23dbjbGX6e0ZsSHgEZX6A4IAf1SO3AJ2bNrHlk&r=dinfzkbAbqkWVX3xF1fcv2PCcim1G4Oe9iPy5r31AUk&m=ba4_RADdTnIC3PbijlHkB7W0CLSMOpRyERiyBtibG6A&s=VbRf867jJyHryM6ThhN7TozmSskq2_S09XcLonvaXfI&e=>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20170314/2d51b620/attachment.html>