[labnetwork] 2-photon Lithography (Nanoscribe or other nano 3D printers)
Price, Aimee
price.798 at osu.edu
Tue Apr 2 10:16:53 EDT 2024
Hi Adam,
My suggestion would be to contact Dr. Emine Cagin at Heidelberg (Nanofrazor) about this. They may have customers who could assist, or potentially do so themselves. I’ve copied Emine on this message and her contact info is below.
Dr. Emine Cagin
CTO
----------------------------------------------------------------------------
emine.cagin at himt.ch<mailto:emine.cagin at himt.ch>
direct: +41 44 500 38 08
tech team: +41 44 518 82 80
----------------------------------------------------------------------------
Heidelberg Instruments Nano AG
Bändliweg 30
8048 Zürich
Switzerland
www.himt.ch<https://urldefense.com/v3/__http:/www.himt.ch__;!!KGKeukY!xsNCSEN5ZJF3L60-k5zmyGQFgBWmVK4Jeyg7yP3XjVOWu131CNtKSoHnAEfcms4TWWr1fbA9uJS9pwfoUQV3tjw7$>
----------------------------------------------------------------------------
Best,
Aimee Bross Price
Manager, Nanofabrication
The Ohio State University
Nanotech West Lab
Institute for Materials Research
1381 Kinnear Road
Suite 100
Columbus, OH 43212
614-292-2753
Price.798 at osu.edu<mailto:Price.798 at osu.edu>
Nanotech.osu.edu
Pronouns: she/her/hers
Conference Chair, 67th International Conference on Electron, Ion, Photon Beam Technology and Nanofabrication (EIPBN)
La Jolla, California May 28-31, 2024
| https://eipbn.org<https://eipbn.org/> |
From: labnetwork <labnetwork-bounces at mtl.mit.edu> On Behalf Of Adam Legacy
Sent: Monday, April 1, 2024 11:59 AM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] 2-photon Lithography (Nanoscribe or other nano 3D printers)
Dear Lab Network, We are interested in obtaining 3D microfabricated structures (lenses and pillars) with a height of 15-20 microns (z-axis) and a width of 40-50 microns (x and y-axis). Ideally, we require a resolution of less than 100 nm for
Dear Lab Network,
We are interested in obtaining 3D microfabricated structures (lenses and pillars) with a height of 15-20 microns (z-axis) and a width of 40-50 microns (x and y-axis). Ideally, we require a resolution of less than 100 nm for high precision.
We are not interested in using the 3D printing tool ourselves and would prefer a service that can print our designs and offer a complete printing service.
We would like to learn more about your capabilities and pricing if your company provides such services using Nanoscribe or similar high-precision 3D microfabrication tools.
Thank you for your time and consideration.
Sincerely,
Best regards,
Adam Legacy
Photonic Engineer
HighRI Optics Inc.
www.highrioptics.com<https://urldefense.com/v3/__http:/www.highrioptics.com__;!!KGKeukY!271sBCxRp5A9JkmRq9L-o4JdVpxr20tCiR5TOm3awo0uyEO4AeKM9hJ2xqrlI-bd9dh_VNw65kL4--02VMZKgFXP$>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20240402/9f1a8aea/attachment.html>
More information about the labnetwork
mailing list